Subscribe to RSS feed




Stevie’s broken boat

Take one perfectly water tight Pyranha M3, throw it down a few rivers that could do with a bit more flow……..and this could happen.

After this drop Stevie’s feet started getting wet.

Investigations revealed

Lew has been itching to use his boat repairing skills

Placing the self adhisive flash banding on the inside and finishing off with duct tape to avoid any snags

We finish off the river which luckily turns out to be only a few hundred yards downstream, The crack is prevented from spreading further by heating an allen key and pushing it through the hull at the ends of the crack, then welded.

The finished weld

Gently throw repaired boat off a 4 mtere slide n drop on the Euga.